Wood Floor Oil - 0.75L

New

Wood Floor Oil

Wood Floor Oil Natural and White are used on untreated and lye primed woodwork such as interior floors, stairs, panels and furniture. Floor Oil has excellent penetration properties and therefore ensures a hard-wearing, flexible, dirt and water repellent surface.

More details

In stock

By buying this product you can collect up to 8 loyalty points. Your cart will total 8 points that can be converted into a voucher of 40,000 ₫.


819,500 ₫

More info

Wood Floor Oil

Wood Floor Oil Natural and White are used on untreated and lye primed woodwork such as interior floors, stairs, panels and furniture. Floor Oil has excellent penetration properties and therefore ensures a hard-wearing, flexible, dirt and water repellent surface. The Floor Oil Natural is mainly used on dark wood species. It enhances and protects the natural warm glow of the wood whereas light wood species are often finished with Floor Oil White which maintains and protects the natural light colour. Floor Oil can both be applied manually or by machine. Floor Oil is available in Natural and White.

How to do :

  1. The unfinished woodwork should be freshly sanded with grit 120. Clean with 125 ml Wood Cleaner mixed with 5 l water. The floor must be completely dry and free from dirt and grease before the oil application. Recommended wood moisture max. 12%. The oiling is made at min. 18° C.
  2. Shake oil container well before and during use. Apply the oil with a short-haired paint roller in an even coat onto approx. 5-10 m2 of floor. Leave the oil to be absorbed for 15 minutes. If dry spots appear, apply more oil.
  3. Excess oil is removed or scraped onto next section of floor to be finished. The area is now polished with a beige polishing pad under doodle-bug or with floor machine until the area appears saturated. The floor should not appear wet and there should not be any excess oil left on the surface after polishing. Continue in sections until the whole floor has been finished.
  4. After 8-12 hours or when dry enough to walk on the floor should be buffed with white polishing pad. If a silk-mat surface is required, the finished floor may be buffed with 100 ml Wood Floor Oil to 15 m2 of floor. This is done after the pre-hardening time and the oil must be polished carefully into the floor. Remove any excess oil from the surface. After 24 hours the floor may be used with caution. The surface is fully hardened after 4-7 days. Do not expose the floor to water during the hardening time.

Customers who bought this product also bought:

30 other products in the same category: