Decking Oil - 18L

Decking Oil

PROTEGO Decking Oil is available in a range of colours which offers the opportunity of upgrading wood with the chosen colour of the Decking Oil. Decking oil is used for oiling of decking boards or tiles but may also be used for cladding and fences of wood. The PROTEGO Decking Oil is used both for basic finishing and later rejuvenation of the decking. The Decking Oil offers a large number of advantages which has been ensured through the formulation of the product. The special oil components ensure a long lasting hard wearing finish. Built in components guarantee UV protection and a water repellent coating. Protection against the damaging UV rays of the sun is important for non deterioration of the oil and the wood itself.

How to do :

1. Treat new decking timber with oil before use. Clean thoroughly before starting the treatment. For old decks, clean before treatment using Decking Cleaner, then let the wood dry for approximately 24 hours. Make sure the wood is completely clean and dry. Sand down any wood fibres with fine sandpaper. Perform the treatment in dry weather only. Avoid direct sunlight and high temperatures.
2. Stir the oil thoroughly before use. Apply the oil evenly using a brush or paint roller. Treat the crosscut ends first. Remove any excess oil with lean cotton cloths after no more than 20 minutes. Take particular care to remove excess oil from joints and grooves. If the surface does not appear to be saturated with oil, repeat the treatment. It takes 24 to 48 hours for the oil to harden completely, depending on weather conditions and outdoor temperature. The wood must not be exposed to water during this period.